​How self-test harness "healthy" ?

Master Chen said , each owner can check the seat belts themselves are aging, such as loss of tension . General belts have belt force limiter function device . In addition , usually to always check the release button on the buckle position , must be able to confirm this button easily accessible and easy to open , in order to be able to unfasten their seat belts when the case occurred .

Master Chen tips , do not alter or add their own belts . In addition , the rear double mortise lock with anti generally inserted in the wrong function , anti- lock can only be inserted in the wrong plug and one bolt match.exhaust manifolds Insert this anti- lock plug inserted in the wrong holes can unlock the latch of the door with a key or other hard objects.

Belts also need maintenance

When the seat belt is dirty , you can use a mild soap and lukewarm water , with the wet cloth or sponge to scrub , be careful not to use dyes or beautiful white agent, otherwise it will corrode the seat belt , do not use hard brush to wash , to avoid reducing the tensile strength of the belt . Before seatbelt is dry , do not use. There are no foreign objects enter the lock check if there is dust into the shoulder belt splices , seat belts will slow to respond , in a timely manner with a clean , dry cloth to wipe clean. If the seat belt aging or damaged, you must go to the 4S shop to replace. Seat belt can not be demolished , be sure to ask if there are problems professional repair.

Seat belts correctly Department of Law

1 , after adjusting the seat ,exhaust manifold sit up straight .

Seize the seat belt bolt head , pulled down along the body belts, seat belts do not let kink , then buckle to buckle in the tongue . At this point , remember to pull a pull bolt upward , to confirm whether the seat belt is fully locked. Do not adjust the seat backrest tilted excessively , otherwise the belt will not be able to properly stretch and winding .

Two different positions the seat belt law system .

Common shoulder belt should be tied to the shoulder , across the chest , must not be placed under his arm . The lap belt as low as possible a number of lines , close to the lower hip , not tied at the waist. The benefits of this system is that the collision impact force will act on the pelvic bones , to ensure maximum stability of the human body . After the lap belt fastened , preferably in the drop-down lap belt buckle end , while pulling up the shoulder belts.
Related Articles: http://maxspeedingrods.jimdo.com/2015/02/13/alpha-n-escalation-of-violence-m3-m4/ http://maxspeedingrods.zohosites.com/blogs/post/1050-horsepower-super-LaFerrari